TPB TPC TPD600 Plunger Pumps and Accessories

The TPB/C/D600 is a non-offset, reciprocating, positive displacement, horizontal, single-acting triplex plunger pump which is rated at 600 Brake Horsepower input maximum. The pump is designed for intermittent duty well service applications such as acidizing, cementing, fracturing, well killing, gravel packing, etc.

The TPB/C/D600 Pump consists of a Power End, Speed Reducer Assembly and a Fluid End Assembly. TPC600 pump have an additional connecting box assembly. The Speed Reducer can be installed on either the right hand or left hand side of the pump and can be installed in any one of 16 different input shaft locations to accommodate a number of different pumping unit drive train configurations. Two different fluid cylinders are available to accommodate five plunger sizes for a variety of pressures and volumes.

Optional packing assemblies, valve assemblies, discharge flanges, suction manifolds, etc. are available for a wide variety of unitization arrangements; for the pumping of various specific fluids; and for service in a wide range of ambient conditions. The weight of the pump will vary slightly depending on plunger size and other options but will not vary more than plus or minus 5% of the advertised weight.

The TPB/C/D600 pump can be used to pump the liquid medium in the well service. But the TPB/C/D600 pump is not rated for sour gas service, such as H2S. TPB/C/D600 pump works where ambient temperature ranges from -30℃ to 45℃. If the ambient temperature exceeds the limits, please contact Engineer Department.